[MAPPACK] KilltrocityMappack 2

RESIDENTx · Post by **RESIDENTx** » Sun Dec 03, 2006 11:12 am

but it says to disable it....

scynide · Post by **scynide** » Sun Dec 03, 2006 1:56 pm

RESIDENTx wrote:could somebody PLEASE host the first killtrocity mappack on HSM mods because that is the only place where i can download at around 2MB and other places i can only hit round 300kb/s which turns the download time from about 6min to 45min...someone please host

Wow you call that slow?!?! I would kill to have downloads at 300 Kb/s. It took me like 7 1/2 hour to download the RAR file for this. I have a broadband connection, but mine is really sh!ty. I downloaded it at an average of 16 Kb/s.

Has anyone figured out how to fix Deep Blue Sea not showing up? It shows that it is there and active when I open the mainmenu.map, but it does not show up in game. It is really getting annoying trying to figure this out.

Gizza · Post by **Gizza** » Sun Dec 03, 2006 2:07 pm

ROFL LMAO Thats like dialup speed...i couldn't stand it...
Mine runs at 280-340kps

Xiion · Post by **Xiion** » Sun Dec 03, 2006 2:12 pm

mine downloaded at 102mb/s

(modified lan connection)

Exabyte · Post by **Exabyte** » Sun Dec 03, 2006 2:14 pm

You think thats bad I run on modem 2-3kps
Stop using emoticons from that site.

RESIDENTx · Post by **RESIDENTx** » Sun Dec 03, 2006 3:37 pm

enough chat about the conenction details, does anyone else have the problem that i am having where lockout is in their maps list with all the other modded maps, they all work fine for both mappack 1 and 2, but in 1 and 2, lockout is listed and it fails every time, and i have disbaled the auto update many times and it is still there

scynide · Post by **scynide** » Sun Dec 03, 2006 4:06 pm

I figured out how to get rid of Lockout, the message about Content being damaged and unusable, and get Deep Blue Sea to be on the menu all at the same time! Also this does not affect other versions of Halo 2, like the original, and they will still load Mimesis content and all of the dlc map packs. You can use this to get rid of the broken Lockout and the message on any Halo 2 that you have manually disabled the auto update on (Hex edited, or used the the utility to disable it in the default.xbe). Ok here is how to do it:

1. Open the default.xbe that you have manually disabled the autoupdate on, in a Hex editor.
2. Click the "go to address" function in your Hex editor (under "View" in my Hex editor) and type in "4248692" without the quotes for the Offset, and make sure it is set to Dec, (Decimal) and "Beginning of file", and hit "OK."
3. It should bring you to the beginning of "$C\". Change "$C\" to "$t\" or "$p\".
4. Repeat steps 2-3 with numbers 4248704, 4249036, 4249048, 4249119, 4249364, 4249376, 4270612, 4270624, 4270888, and 4270900. Make sure to use the same one for all of them ($t\).

Alternate Step 2-4
2b. Click Edit->Find and type in "$C\" (Hex: 24435C) without the quotes into the box that says "Text". Make sure it is set to "Forward" and to "From beginning" and click "Find All".
3b. It should bring you to the first one it finds, and bring up a box with the locations of all the ones it found. You can click on each location in the box and it will automatically take you to that one.
4b. Go through all of the ones it found and change them from "$C\" to "$t\".

5. Make sure to save, then you can close the Hex editor, and FTP the default.xbe that you just edited into your Killtrocity v2 folder or whatever folder it goes in on your Xbox.

Plz PM me if you are confused or have questions. I hope this helps some people out.

RESIDENTx · Post by **RESIDENTx** » Sun Dec 03, 2006 9:52 pm

you are my hero!

thanx once again!

smacktalker · Post by **smacktalker** » Mon Dec 04, 2006 7:36 am

Xiion wrote:mine downloaded at 102mb/s

(modified lan connection)

sure.. i mod my lan with dothalo to download with 1 gb/s

these hosts are not even capable of letting someone download with 100 mb/s

Xiion · Post by **Xiion** » Mon Dec 04, 2006 3:10 pm

smacktalker wrote:
Xiion wrote:mine downloaded at 102mb/s

(modified lan connection)
sure.. i mod my lan with dothalo to download with 1 gb/s

these hosts are not even capable of letting someone download with 100 mb/s

lol you obviously dont know what a modified lan is do you? in my terms, its a whole entire system of lan connections hooked up to one computer, all running at the same time.

ShadowKlone · Post by **ShadowKlone** » Mon Dec 04, 2006 9:49 pm

yay

hurray for v2

smacktalker · Post by **smacktalker** » Tue Dec 05, 2006 5:48 am

bragggggg wrote:lol you obviously dont know what a modified lan is do you? in my terms, its a whole entire system of lan connections hooked up to one computer, all running at the same time.

even if that is true. it wouldn't matter, because i just told you these webhosts aren't even capable of letting someone download with 100mb/s

Volviga · Post by **Volviga** » Wed Dec 06, 2006 1:44 am

Awesome modz!!!

you definetly have my vote!!

Volviga · Post by **Volviga** » Wed Dec 06, 2006 8:36 am

i FTP them to my hard drive but the maps doesn't work!!
i get the message every time i try to load a map it says " you were not able to load the map ". so can someone help me plz

Dacian · Post by **Dacian** » Wed Dec 06, 2006 6:19 pm

scynide wrote:I figured out how to get rid of Lockout, the message about Content being damaged and unusable, and get Deep Blue Sea to be on the menu all at the same time! Also this does not affect other versions of Halo 2, like the original, and they will still load Mimesis content and all of the dlc map packs. You can use this to get rid of the broken Lockout and the message on any Halo 2 that you have manually disabled the auto update on (Hex edited, or used the the utility to disable it in the default.xbe). Ok here is how to do it:

1. Open the default.xbe that you have manually disabled the autoupdate on, in a Hex editor.
2. Click the "go to address" function in your Hex editor (under "View" in my Hex editor) and type in "4248692" without the quotes for the Offset, and make sure it is set to Dec, (Decimal) and "Beginning of file", and hit "OK."
3. It should bring you to the beginning of "$C". Change "$C" to "$t" or "$p".
4. Repeat steps 2-3 with numbers 4248704, 4249036, 4249048, 4249119, 4249364, 4249376, 4270612, 4270624, 4270888, and 4270900. Make sure to use the same one for all of them ($t\).

Alternate Step 2-4
2b. Click Edit->Find and type in "$C" (Hex: 24435C) without the quotes into the box that says "Text". Make sure it is set to "Forward" and to "From beginning" and click "Find All".
3b. It should bring you to the first one it finds, and bring up a box with the locations of all the ones it found. You can click on each location in the box and it will automatically take you to that one.
4b. Go through all of the ones it found and change them from "$C" to "$t".

5. Make sure to save, then you can close the Hex editor, and FTP the default.xbe that you just edited into your Killtrocity v2 folder or whatever folder it goes in on your Xbox.

Plz PM me if you are confused or have questions. I hope this helps some people out.

Dude, you rule! Is there any way you can host the hacked xbe? I know you're probably thinking it's simple and I can do it, but I'm afraid to mess up the xbe and then be boned.

jkjk · Post by **jkjk** » Thu Dec 07, 2006 8:53 am

Dacian wrote:Dude, you rule! Is there any way you can host the hacked xbe? I know you're probably thinking it's simple and I can do it, but I'm afraid to mess up the xbe and then be boned.

No. You can only post a patch of the xbe here.

Once and if you guys fix the freezing issues with some of the maps, can you rename it to like 2.1 so people know to get the new version?

Dacian · Post by **Dacian** » Thu Dec 07, 2006 3:38 pm

jkjk wrote:
Dacian wrote:Dude, you rule! Is there any way you can host the hacked xbe? I know you're probably thinking it's simple and I can do it, but I'm afraid to mess up the xbe and then be boned.
No. You can only post a patch of the xbe here.

Once and if you guys fix the freezing issues with some of the maps, can you rename it to like 2.1 so people know to get the new version?

Uh...why?

blackwolf2580 · Post by **blackwolf2580** » Thu Dec 07, 2006 3:49 pm

Dacian wrote:
jkjk wrote:
Dacian wrote:Dude, you rule! Is there any way you can host the hacked xbe? I know you're probably thinking it's simple and I can do it, but I'm afraid to mess up the xbe and then be boned.
No. You can only post a patch of the xbe here.

Once and if you guys fix the freezing issues with some of the maps, can you rename it to like 2.1 so people know to get the new version?
Uh...why?

it is illegal I think

Ryan9113 · Post by **Ryan9113** » Fri Dec 08, 2006 3:12 pm

Anything off of a Xbox DVD is copyrighted and can't be posted on the net, it is considered Warez.

G_Church · Post by **G_Church** » Fri Dec 08, 2006 3:26 pm

i downloaded it at 252mbps it took like 3 mins oh yeah i am having a shitty time with this too

anyone else have the problem of 1st person to 3rd person and staying that way? how do i fix that?

HaloMods "Classic" Read-only Archive

[MAPPACK] KilltrocityMappack 2

Yep