ok hi,
i just rebuilt the fog from Silent cartographer into infinity and yes the fog is the water. now i need to know how to get it to show up it shows up in hmt and i messed around with my fog plugin i have and did some hex and it still don't show up how do i get it to show up in the map is all i'm asking if you could tell me it would be greatly appreiciated.
Water in infinity need help.... i rebuilt it in from Sc....
-
- Posts: 12
- Joined: Wed Jul 14, 2004 8:45 pm
- Contact:
-
- Posts: 334
- Joined: Wed Apr 21, 2004 8:58 am
- Location: Getting eaten by tux
- Contact:
Well, if ur talking about the water debris, u need 2 use this tut (find where i got 2 and carry on from there)
-------- Starting Up --------
1. Create a folder called 'Weather'
2. Copy a fresh copy of the map you are going to use into this folder
-------- Beginning The Process --------
3. Open HMT
4. Open the map you placed in your 'Weather' folder
5. Goto 'Tools', 'Extract', 'Batch Extract'
6. Check 'Save Metadata'
7. Open 'B40.map' in HMT
8. Scroll down to [rain]
9. Click 'levels\b40\snow'
10. Check 'Recursive' in 'Tag Information'
11. Click 'Save Meta'
12. Save these files into your 'Weather' folder
-------- Rebuilding The Map --------
13. Goto 'Tools', 'Rebuild Map'
14. Choose the map in your 'Weather' folder as your original map
15. At the bottom, click 'Add'
16. Browse to, 'levels\b40\snow.rain.meta'
17. Hit 'Rebuild'
-------- Adding The Snow--------
18. Open the rebuild map in HMT
19. Scroll down to the [rain] tag
20. Click 'levels\b40\snow'
21. In 'Tag Information', find "ID: _ _ _ _ _ _ @ 0x_ _ _ _ _ _"
-. E.g. ID: "EB8C0A18 @ 0xA11AAC"
22. Copy the 1st set of numbers, (e.g. EB8C0A18)
23. Expand the 'Utilities' section underneath
24. Paste the number into the text box on the left of 'Swap Endian'
25. Click 'Swap Endian' and make a note of this number
25. Close HMT
27. Open your map in a hex-editor
28. Goto 'Edit', 'Find'; enter NAIR and click find.
29. Underneath, or to the right of the location, you should see FF FF FF FF
30. Replace this with the number you got from the 'Swap Endian' box
-------- Starting Up --------
1. Create a folder called 'Weather'
2. Copy a fresh copy of the map you are going to use into this folder
-------- Beginning The Process --------
3. Open HMT
4. Open the map you placed in your 'Weather' folder
5. Goto 'Tools', 'Extract', 'Batch Extract'
6. Check 'Save Metadata'
7. Open 'B40.map' in HMT
8. Scroll down to [rain]
9. Click 'levels\b40\snow'
10. Check 'Recursive' in 'Tag Information'
11. Click 'Save Meta'
12. Save these files into your 'Weather' folder
-------- Rebuilding The Map --------
13. Goto 'Tools', 'Rebuild Map'
14. Choose the map in your 'Weather' folder as your original map
15. At the bottom, click 'Add'
16. Browse to, 'levels\b40\snow.rain.meta'
17. Hit 'Rebuild'
-------- Adding The Snow--------
18. Open the rebuild map in HMT
19. Scroll down to the [rain] tag
20. Click 'levels\b40\snow'
21. In 'Tag Information', find "ID: _ _ _ _ _ _ @ 0x_ _ _ _ _ _"
-. E.g. ID: "EB8C0A18 @ 0xA11AAC"
22. Copy the 1st set of numbers, (e.g. EB8C0A18)
23. Expand the 'Utilities' section underneath
24. Paste the number into the text box on the left of 'Swap Endian'
25. Click 'Swap Endian' and make a note of this number
25. Close HMT
27. Open your map in a hex-editor
28. Goto 'Edit', 'Find'; enter NAIR and click find.
29. Underneath, or to the right of the location, you should see FF FF FF FF
30. Replace this with the number you got from the 'Swap Endian' box

-
- Posts: 334
- Joined: Wed Apr 21, 2004 8:58 am
- Location: Getting eaten by tux
- Contact:
-
- Posts: 12
- Joined: Wed Jul 14, 2004 8:45 pm
- Contact: