PMI and Multiple PMI tut

[talmeeno]

this is a quick tutorial that i made when i was bored one day it will help you make perfect model injections and multiple perfect model injections.

in this tutorial you will need the following program hmt download here http://files.halomods.com/viewtopic.php?t=4198

Single PMI

1. open up blood gulch in Hmt and go to tools>extract>batch extract. check the extract metadata button and browse to a folder you should make in your desktop call it gulch mod make a folder in gulch mod called batch extract. then click the start batch extraction.

2. if it comes up with a pop up saying extract bsp say yes. when it finishes it should say the time it took to extract click ok.

3. then go to tools> extract> bsp/model sections save it in another folder on your desktop name it vip. then click ok

4. when that finishes close bloodgulch and open b40.map (assault on the controll room) in hmt then scroll down to the vehicles section and choose the pelican then recursevly extract the metadata to a folder in mod gulch called pelican.

5. go to tools> generate raw model offset list and save it in the mod gulch folder.

6. go to tools> extract> raw model then click on the load cvs file button and choose the offsets that you just saved.

7. scroll down untill you see vehicles\pelican\pelican then click on it and extract it to the folder mod gulch/pelican/vehicle/pelican

8. go to tools> model decraper/BSP builder. in the top box right click and click add and find the modgulch/pelican/vehicles/pelican and choose the pelican.mod2.meta.

9. for the next 3 boxes browse to the folder vip and choose the verticese, indecise, and sbsp then click the "decrap these models and build a new bsp chunk while were at it" button

10. when it finishes open your vip folder and copy the bloodgulch.sbsp.meta and then paste it in the mod gulch/batchextract/levels/test/bloodgulch and overwrite the file that is allready there.

11. make a new folder in mod gulch and call it build.

12. copy all the files in batch extract to the build folder.

13. when that finishes copying copy all the folders in mod gulch/pelican to the build folder and choose yes to all.

14. then go to the c drive and go to your halo folder and go to maps then copy a bloodgulch.map from there and paste it in the build folder.

15. then on hmt go to tools> rebuild map. for the original map choose the bloodgulch.map in the build folder and say yes to the popup.

16. in the bottom box right click and click add then browse to the mod gulch/build/vehicles/pelican and select everything in there then click open.

17. once that is done go to the top and click the BUILD button.

18. it will take a while and then there should be a popup saying are there any new verticese say yes and go to the vip folder and choose bloodgulch.verticese.new

18. then another popup should say are there any new indecese say yes and choose in the vip folder bloodgulch.indecese.new and say ok

19 another pop up should come say yes. then it should finish.

20. now for the final step go to your halo folder and go to maps then delete the bloodgulch.map in there.

21. then go to the build folder and copy the bloodgulch.map.rebuild.map and paste it in your halo maps folder and then rename it to bloodgulch.map

22. in hmt open the bloodgulch map that you just renamed and scroll down to vehicles you should see the pelican in there click on the pelican and on the right hand side lick on seat and click 0 then change the name from P-driver to w-driver and click save.

23. then copy the numbers and leters from the top of the screen on the pelican and then go to the ghost vehicle and paste the pelican numbers and leters over the ghosts and click save.

then you are done you now have succesfully made a perfect modle injection

Multiple PMI

1. open up blood gulch in Hmt and go to tools>extract>batch extract. check the extract metadata button and browse to a folder you should make in your desktop call it gulch mod make a folder in gulch mod called batch extract. then click the start batch extraction.

2. if it comes up with a pop up saying extract bsp say yes. when it finishes it should say the time it took to extract click ok.

3. then go to tools> extract> bsp/model sections save it in another folder on your desktop name it vip. then click ok

4. when that finishes close bloodgulch and open b40.map (assault on the controll room) in hmt then scroll down to the vehicles section and choose the pelican then recursevly extract the metadata to a folder in mod gulch called pelican. Then also choose the wraith and recursively save the metadata to a folder in mod gulch called wraith.

5. go to tools> generate raw model offset list and save it in the mod gulch folder.

6. go to tools> extract> raw model then click on the load cvs file button and choose the offsets that you just saved.

7. scroll down untill you see vehicles\pelican\pelican then click on it and extract it to the folder mod gulch/pelican/vehicle/pelican
then also extract the wraith to mod gulch/wraith/vehicle/wraith

8. go to tools> model decraper/BSP builder. in the top box right click and click add and find the mod gulch/pelican/vehicles/pelican and choose the pelican.mod2.meta.
And also find the mod gulch/wraith/vehicles/wraith and choose the wraith.mod2.meta

9. for the next 3 boxes browse to the folder vip and choose the verticese, indecise, and sbsp then click the "decrap these models and build a new bsp chunk while were at it" button

10. when it finishes open your vip folder and copy the bloodgulch.sbsp.meta and then paste it in the mod gulch/batchextract/levels/test/bloodgulch and overwrite the file that is allready there

11. make a new folder in mod gulch and call it build.

12. copy all the files in batch extract to the build folder.

13. when that finishes copying copy all the folders in mod gulch/pelican to the build folder and choose yes to all. Then copy all the files from mod gulch/wraith to the build folder as well.

14. then go to the c drive and go to your halo folder and go to maps then copy a bloodgulch.map from there and paste it in the build folder.

15. then on hmt go to tools> rebuild map. for the original map choose the bloodgulch.map in the build folder and say yes to the popup.

16. in the bottom box right click and click add then browse to the mod gulch/build/vehicles/pelican and select everything in there then click open. Then right click and say add again and browse to the mod gulch/build/vehicles/wraith and select everything in that folder then click open.

17. once that is done go to the top and click the BUILD button.

18. it will take a while and then there should be a popup saying are there any new verticese say yes and go to the vip folder and choose bloodgulch.verticese.new

18. then another popup should say are there any new indecese say yes and choose in the vip folder bloodgulch.indecese.new and say ok

19 another pop up should come say yes. then it should finish.

20. now for the final step go to your halo folder and go to maps then delete the bloodgulch.map in there.

21. then go to the build folder and copy the bloodgulch.map.rebuild.map and paste it in your halo maps folder and then rename it to bloodgulch.map

22. in hmt open the bloodgulch map that you just renamed and scroll down to vehicles you should see the pelican in there click on the pelican and on the right hand side lick on seat and click 0 then change the name from P-driver to w-driver and click save.

23. then copy the numbers and leters from the top of the screen on the pelican and then go to the ghost vehicle and paste the pelican numbers and leters over the scorpions and click save.

24. then go to the wraith in the vehicles section and on the right click on seat and choose 0 then change the name from wraith-driver to w-driver. And save

25. then copy all the numbers and leters from the top of the screen on the wraith and go to the ghost vehicle and paste the wraith