Homemade Xbox 360 Junk

kornkidcrazy · Post by **kornkidcrazy** » Fri Jul 13, 2007 9:33 pm

Ok, this thread is dedicated to Xbox 360 customization. You can post the wallpaper you use for all of your blades if you are using a custom theme, tell people how to make new themes by mixing and matching free themes in the guide, or post pictures/tutorials of physical Xbox 360 customization, like if you spray painted it black or something.

With all this said, I have a them designed for HD/widescreen TVs. It is designed to go along with the new Halo 3 Xbox 360. *Note, it looks best with a dark green guide background and the carbon trim.

Click Here

bricksarefun · Post by **bricksarefun** » Fri Jul 13, 2007 9:44 pm

Last time I checked, the custom theme thing was pretty limited, you could change the trim, and the background/picture, but the picture would be on all the tabs >_>

Tural · Post by **Tural** » Fri Jul 13, 2007 9:46 pm

Mhm. Nowhere did he say it wasn't the same.

bricksarefun · Post by **bricksarefun** » Fri Jul 13, 2007 10:15 pm

Nowhere did I say that he did. I was merely stating that it is pretty hard to create a good custom theme.

Tural · Post by **Tural** » Fri Jul 13, 2007 10:49 pm

The limitations of customization isn't what this thread is about.

xbox · Post by **xbox** » Sat Jul 14, 2007 5:37 am

kornkidcrazy wrote:post pictures of physical Xbox 360 customization, like if you spray painted it black or something.

stalker

anyone want to buy it for $100 dollars? it has the ring of death so I'm going to sell it on ebay "as is" for $100. if no one here wants the case or something, I'll sell the hardrive after I get my elite.
also since it an older model it has a better power cable ( it will never fall out) and the top and bottom vent holes are shiny silverish color not the new not shiny dark ones they have now.

WastingBody · Post by **WastingBody** » Sat Jul 14, 2007 8:00 am

xbox, you can fix it by doing the x-clamp replacement. I did it and my 360 has worked perfectly for almost a month. I would take a picture of it, but I haven't gotten around to putting it back together.

shadowkhas · Post by **shadowkhas** » Sat Jul 14, 2007 8:19 am

When my friend gets my 360, I'm going to do some stuff to it. Probably just making it a metallic appearance, but I'll post pictures when I finish it. If this thread will still be alive.

xbox · Post by **xbox** » Sat Jul 14, 2007 8:48 am

WastingBody wrote:xbox, you can fix it by doing the x-clamp replacement. I did it and my 360 has worked perfectly for almost a month. I would take a picture of it, but I haven't gotten around to putting it back together.

what do you mean putting it back together?
do you know if this is a permanent fix or a temporary one, because I was planing on getting an elite or the halo 3 console

WastingBody · Post by **WastingBody** » Sat Jul 14, 2007 9:42 am

I meant I haven't put the case back on my 360. I'm pretty sure that the x-clamp replacement is a permanent fix.

xbox · Post by **xbox** » Sat Jul 14, 2007 10:29 am

you don't need the case to run the console, infact it should run cooler without it

shadowkhas · Post by **shadowkhas** » Sat Jul 14, 2007 12:18 pm

But then dust and other junk can gather on your motherboard and cause problems.

HaloMods "Classic" Read-only Archive

Homemade Xbox 360 Junk

Homemade Xbox 360 Junk

Re: Homemade Xbox 360 Junk