My Axe Flamethrower rig.

xXxCocoFangxXx · Post by **xXxCocoFangxXx** » Mon May 22, 2006 2:30 pm

Awesome!!

Grave · Post by **Grave** » Mon May 22, 2006 2:45 pm

It is pretty cool but are you just gonna hold the flame up to the front

RaVNzCRoFT · Post by **RaVNzCRoFT** » Mon May 22, 2006 2:58 pm

Cuda wrote:I cant get the WD-40 tip to fit the Axe tip. any suggestions?

Try melting the end of the tip and trying to stick it to the Axe tip.

Edit: I checked my Axe can, and there would still be a lot of Axe that wouldn't be going into the WD-40 tip. Just use a drink straw.

[cc]z@nd! · Post by **[cc]z@nd!** » Mon May 22, 2006 4:02 pm

cool idea, but i wouldn't like going through so much axe. that craps too expensive to burn (although it's fun).

i'd suggest just using WD-40 or gasoline (although you'd have to rig up your own way to aerosol the gasoline. as mentoined; super soaker anyone?)

i still prefer the old fashioned way, just holding the can.

btw, you guys will like totse.net

jks · Post by **jks** » Mon May 22, 2006 4:12 pm

I used one of those super soakers set to spray mode, then modified it to mist it more, then hold a lighter in front and FOOOOM! Flame. Also used a lower viscosity mix of homemade napalm, I can send you the recipe.

imgettionowned · Post by **imgettionowned** » Mon May 22, 2006 4:14 pm

jks wrote:I used one of those super soakers set to spray mode, then modified it to mist it more, then hold a lighter in front and FOOOOM! Flame. Also used a lower viscosity mix of homemade napalm, I can send you the recipe.

It would have to be a really thinned out napalm because it gets really sticky and thick.

Also, to make it I remember reading somewhere that you ley styrafoam cups dissolve in gas.

Cuda · Post by **Cuda** » Mon May 22, 2006 4:16 pm

Well, I modified the tip on the Axe, so the hole you see, is much smaller, than the one you see on the can.

More Pics....

The remnants of the Original sprayer on the can(the only piece im using has been trimmed with my trusty razor knife)

The Tip on the can:

Front view of the rig:

The Trigger mechanism(storebought)

gh0570fchurch · Post by **gh0570fchurch** » Mon May 22, 2006 4:36 pm

looks awesome, i want one

Rallos · Post by **Rallos** » Mon May 22, 2006 5:11 pm

Nice.

[cc]z@nd! · Post by **[cc]z@nd!** » Mon May 22, 2006 6:01 pm

cool. makes pest control much more enjoyable!

gh0570fchurch · Post by **gh0570fchurch** » Mon May 22, 2006 6:07 pm

as long as you dont burn down your house in the proccess.

Grave · Post by **Grave** » Mon May 22, 2006 6:33 pm

so where does the flame come in do you just hold it in your hand?

jks · Post by **jks** » Mon May 22, 2006 6:55 pm

imgettionowned wrote:Also, to make it I remember reading somewhere that you ley styrafoam cups dissolve in gas.

Its polystyrene, or styrofoam, gas, and gun powder, normally you want about 25% polystyrene, 25% gunpowder, and 50% gas, but the special mix I made was about 10% poly, 60% gas and 30% gunpowder, makes for a nice mix. You can play with the mix to get different desired effects, like one time I made it super viscous and coated a PVC pipe with it and was walking around waving it like a flaming sword, very fun.

Cuda · Post by **Cuda** » Mon May 22, 2006 7:12 pm

Egg yolk and gasoline makes a good, and cheap napalm. The flame is ignited about an inch away from the can (hence the stick Lighter) and with the WD-40 tip, about a ha;h inch out

The Arbiter · Post by **The Arbiter** » Tue May 23, 2006 3:06 pm

Spray those girls who keep chasing you around.

Cuda · Post by **Cuda** » Fri May 26, 2006 3:42 pm

Ok, Ive gone through my first can on testing, and Ive learned some stuff. The WD-40 tip doesnt work as good as planned, and when the flame crawled up the spray, the flame stayed the same length, but melted the tip of the WD-40 straw.

anyone know of a good substitute for axe? I need one that has the same ingredients,b but a bit bigger in size and quantity.

JK-47 · Post by **JK-47** » Fri May 26, 2006 6:30 pm

Cuda wrote:Ok, Ive gone through my first can on testing, and Ive learned some stuff. The WD-40 tip doesnt work as good as planned, and when the flame crawled up the spray, the flame stayed the same length, but melted the tip of the WD-40 straw.

anyone know of a good substitute for axe? I need one that has the same ingredients,b but a bit bigger in size and quantity.

Maybe if you attach dynamite to it it would work?

Hyperdash · Post by **Hyperdash** » Fri May 26, 2006 8:11 pm

jks wrote:Looks like a spray bottle with an axe attachment O_o nice. I could send you the plans I made to make a BIC lighter go whenever you pull the trigger, I used it on my gasoline+super soaker flamethrower.

That was you? I saw that vid that was awesome! Also can ya E-mail me the plans? man_with_golden_gun2003@yahoo.com Thanks in advance! Also hairspray works wonders. Also with that sig it makes me a little woried. TERRORIST!!!!

Cuda · Post by **Cuda** » Fri May 26, 2006 11:28 pm

multi-genre wrote: Maybe if you attach dynamite to it it would work?

heh.... no.

I'm serious. I'd like to continue my testing through this 3 day weekend. Before the can ran out, I did take some really nice pics of it, over the stove, not the lighter.(lighter technique wasn't fully perfected) but I got a good 14 inch flame with the pilot off.

Doctor · Post by **Doctor** » Sat May 27, 2006 2:38 am

I think this is pretty cool, but by any chance has the flame of the axe ever came back through the bottle and blew it up for you? What is the longest you have ever held down the trigger?