Page 1 of 1
Roll and Pitch
Posted: Thu Mar 09, 2006 5:23 pm
by WaywornMmmmm
1.Ok well first off, is roll like a barral roll or is it wether its face is facing the ground or the sky. Same thing with pitch.
2.Are the measurements of yaw the same as pitch and roll?(4.7=90 degrees)
Posted: Thu Mar 09, 2006 5:32 pm
by xbox7887
1.57 radians is the equivilant of 90 degrees...in order to convert degrees to radians you multiply the degrees with (pi/180).
Posted: Thu Mar 09, 2006 5:37 pm
by WaywornMmmmm
is that pi over 180 or pi or 180. And why does 4.7 work for 90 deggrees?
Posted: Thu Mar 09, 2006 6:06 pm
by xbox7887
radian=degree*(pi/180)
The reason 4.7 works for 90 degrees is because 4.7 divided by 1.57 (90 degrees) is equal to three 90 degree turns. So really you're 90 degrees in the reverse direction

Posted: Sat Mar 11, 2006 6:33 am
by WaywornMmmmm
ok, now can someone tell what the pitch and roll do?
Posted: Sun Mar 12, 2006 6:20 am
by Snaku
Pitch is tilting front to back. Roll is from side to side, like you said--barrel roll.
Posted: Sun Mar 12, 2006 8:23 am
by WaywornMmmmm
Now this should be my last question on this stuff. with pitch, a negitave number(-1.57) is pointing the object down,and yaw at 0 faces the top of the window in choord finder and when has 1.57 as an angle it turnes to the left. Is this right?
Posted: Mon Mar 13, 2006 9:34 am
by xbox7887
Just think about it....yaw, pitch, and roll values are just rotation around the x, y, and z axis. I believe they all turn counterclockwise but couldn't tell you for sure without doing the math. Just experiment and if it works then leave it at that

Posted: Mon Mar 13, 2006 12:26 pm
by WaywornMmmmm
Well I would experiment but Im Mr.Lazy