Moving seats in a vehicle

[Drigermaster0987]

Is there a plugin like there was for H2 where you could move the XYZ cords of a seat in a vehicle? I injected a new model over the hog and i need to move the passengers seat back and rotate it.

[Soccerfreak]

- - - - - - - - Changing Seat Locations - - - - - - - -

1. Open Halo Map Tools V3

2. Open Blood Gulch

3. Go under the Tag ( mod2 )

4. Select "vehicles\ghost\ghost"

5. Unrecursivly Save Meta onto your Desktop

6. Open the Meta in a Hex Editor

7. Do a search with Text String - ASCII String - Down and search for the Seat Name ( Example - driver )

8. Not G-driver

9. Once found go to the first Reflxive after it

10. Reverse Endian - Subtract Magic - Goto that Offset within the Map

11. From there change the Longs with numbers between your offset and the 803F going down - Change the Longs between 803F - I can't really tell you which ones - Just the ones that look really weird like A0F2 5200 and E427 632B or whatever - Just Test

< - - > Now Updated With Info < - - >



- For "Where you are in seat" FFFF FF3F would be in the back of the seat

- 0000 003F would be in the front of the seat

- For "Seat Location - Where you enter and Where you sit too" FFFF FF3F is high

- 0000 003F is low - Underground? lol

- Anything in between is for example AAAA AAAA wouldn't be too high or too low

Also : You cannot control seat location - It will be around where you are while in the specified seat - For example - If you while in a seat are really high then the seat location is most likely high

[Drigermaster0987]

- - - - - - - - Changing Seat Locations - - - - - - - -

1. Open Halo Map Tools V3

2. Open Blood Gulch

3. Go under the Tag ( mod2 )

4. Select "vehicles\ghost\ghost"

5. Unrecursivly Save Meta onto your Desktop

6. Open the Meta in a Hex Editor

7. Do a search with Text String - ASCII String - Down and search for the Seat Name ( Example - driver )

8. Not G-driver

9. Once found go to the first Reflxive after it

10. Reverse Endian - Subtract Magic - Goto that Offset within the Map

11. From there change the Longs with numbers between your offset and the 803F going down - Change the Longs between 803F - I can't really tell you which ones - Just the ones that look really weird like A0F2 5200 and E427 632B or whatever - Just Test

< - - > Now Updated With Info < - - >



- For "Where you are in seat" FFFF FF3F would be in the back of the seat

- 0000 003F would be in the front of the seat

- For "Seat Location - Where you enter and Where you sit too" FFFF FF3F is high

- 0000 003F is low - Underground? lol

- Anything in between is for example AAAA AAAA wouldn't be too high or too low

Also : You cannot control seat location - It will be around where you are while in the specified seat - For example - If you while in a seat are really high then the seat location is most likely high

I saw that, but dont get a thing