HELP
Posted: Fri Sep 10, 2004 12:47 pm
ok i preety sure i have every thing installed right with my x-bit and i have it flashed. but wen i stick the evox disc in there it wont read it
HaloMods "Classic" Read-only Archive
Visit remnantmods.com for more information
http://www.halomods.info/
HELP
Page 1 of 1
Posted: Fri Sep 10, 2004 12:59 pm
well you either don't have the disk burnt right or you don't have the external chip bios right.
Posted: Fri Sep 10, 2004 1:28 pm
ok i have the evox 2.4 bios flashed its so yeah i mihgt have to burn it again
Posted: Fri Sep 10, 2004 2:06 pm
read the tutorial thoroughly and you might see that they suggest certain things, i ended up haveing to burn two discs because i didnt read closely 
Posted: Fri Sep 10, 2004 4:34 pm
make sure you have the dip switch set to the right bios that you used.
Posted: Sat Sep 11, 2004 6:04 am
it is
Posted: Sat Sep 11, 2004 6:59 am
hum send me an AIM and I will try to help you out
Posted: Sun Sep 12, 2004 9:28 am
Another thing you might want to think about is the fact that there are three different types of DVD drives that come with xbox's, and they all work differently when it comes to reading burned media.
If you have a Samsung drive, a CDRW or DVDR should work flawlessly.
If you have a Phillips drive, DVDR's will work best, and CDRW's will work occasionally (you may have to try it 10 times to get it to work).
If you have a Thompson drive, DVDR's will usually work, but any other media will rarely work.
I would recommend not using CDR's on any drive, use CDRW at least.
xbox-scene has threads on their forum regarding different drives and media that work best together.
It is possible to have burned the cd correctly and it won't work because of this.
However, if this is your first time modding, there's also a very good chance that there is another issue. It took me months to get my first mod working.
Good luck.
If you have a Samsung drive, a CDRW or DVDR should work flawlessly.
If you have a Phillips drive, DVDR's will work best, and CDRW's will work occasionally (you may have to try it 10 times to get it to work).
If you have a Thompson drive, DVDR's will usually work, but any other media will rarely work.
I would recommend not using CDR's on any drive, use CDRW at least.
xbox-scene has threads on their forum regarding different drives and media that work best together.
It is possible to have burned the cd correctly and it won't work because of this.
However, if this is your first time modding, there's also a very good chance that there is another issue. It took me months to get my first mod working.
Good luck.
Posted: Sun Sep 12, 2004 9:51 am
hit me up...
Posted: Sun Sep 12, 2004 9:22 pm
/me hits UCC on the side of the head with a large trout
Posted: Mon Sep 13, 2004 2:11 am
Yea..... That uncalled for.
Back on topic
Did you ever find the reason out for it not working man?
Back on topic
Did you ever find the reason out for it not working man?
Posted: Mon Sep 13, 2004 2:29 pm
I've found all 3 DVD drives to read CDRW, but only the Samsung 605 reads CD-R. My modded Samsung 616T kicks butt though. It reads everything.
Posted: Mon Sep 13, 2004 8:05 pm
ok i think i have it figured out maybe i thinks its the contact so im gonna do the wire instalation and see if that works