HaloMods "Classic" Read-only Archive

how do i connect my xbx and my cmptr i have my xbox connected to a router and the router connected to my x box but i dont know what to do after that

You can either connect the two through a router or use a crossover cable and just connect the two with the crossover. Then look for a program called FlashFXP.

i have herd alot about this program but i dont know were to get it and how to use it. ima NOOB

http://www.inicom.net/pages/en.ffxp-home.php Try google next time.

ok so i have my x box ocnnected to a router my router connected to my computer and an internet source. i have downloaded Flashfxp now what do i do i dont know how to use that flashfxp program. i feel like such a dumba$$

While Xbox-Scene will provide more in-depth tutorials, you will basically have to make it so the PC and the Xbox can "see" each other through the network.

Connect the Xbox to the router, and the PC to the router.
At this point, check the IP on your Xbox, then head to your PC. At your PC, go to Start>Run> "cmd" (minus the quotes).
Once Command Prompt is open, type in "ping xxx.xxx.xxx.xxx" (again, minus the quotes) where the "xxx's" is your Xbox's IP.

Once the command is inputted, hit enter and see if you get "Replys", or "Timed Outs".
If you get "Replys" then you will be ok. If not, then your Xbox and your PC are on different subnets and will have to fix that.. which.. I don't want to go into deep explination of how to get it fixed.

So just check to see if you can ping your Xbox.

ketchup bomb i effing love you man jks. thanks to you i jus figured it out

YOUR THA MAN ,and thanks goes out to every one els thant helped me